Dune Specifications

General

The Dune is a modern design with a California poolside appeal. Its gradual sloping roof and wing-like overhang easily make it one of Summerwood's most stylish designs.

Siding

The Dune has multiple siding options. Smooth or rough Western Red Cedar or maintenance-free Canexel (in 18 colours), as well as Clear Cedar (shown above), are all options on this building. Also available is a "trim-less" mitered corner siding, available only in kit formats in clear cedar and is not recommended for the amateur DIYer! Trim on the Dune is all 1" x 6" cedar.

Roof

The roof on the Dune is a 0.5/12 or 1/12 pitch, making it too flat for regular asphaly or cedar shingles. The most practical roofing solution is EPDM rubberized roofing material; which is ideal for a gradual sloping roof. Also available is an eco-friendly grass roof.

Roof Overhang

Recommended overhang on the left and right sides of the building is 2'-6" and 6" on the front and back. This too can be adjusted upon request; our staff may suggest decreasing the overhang on smaller buildings to maintain a proportional look.

Wall Height

Standard wall height of the Dune is 8' on the "tall" side; the "short" side is dependant on the depth of the building and the slope of the roof. This height can be increased in increments of 6 inches.

Door

The picture-frame concealed door is specific to the Dune and is standard on all Dune models. The door of the Dune is designed to be relatively concealed, without border trim or cladding. It is 76.5"H by 60"W and can be placed on either the front or back walls. This door features brass mercury tubular entry knobs and opens outward only.

Windows

Specific to the Dun is a single-lite transom window, ideal for the upper wall areas on either the back or side walls of the building. As a standard this window is 60"W by 8"H, but can be increased or decreased in width and height as is preferred.

Other Options

Interior shelving and benching, as well as venting are also available on the Dune.